產品詳情
簡單介紹:
R&S 30G頻譜分析儀FSP30 采用了高度集成的前端和全數字信號處理的后端,并與R&S的先進ASIC相結合,是具有**指標和高可靠性的產品.
詳情介紹:
全新的FSP產品系列將**分析儀FSE和FSIQ的眾所周知的優點系統地集成到中級分析儀中。
FSP樹立了中端產品測量速度和**度的標準,它采用了高度集成的前端和全數字信號處理的后端,并與R&S的先進ASIC相結合,是具有**指標和高可靠性的產品.
FSP3:9KHz - 3GHz
FSP7:9KHz - 7GHz
FSP13:9KHz - 13.6GHz
FSP30:9KHz - 30GHz
FSP40:9KHz - 40GHz
—同檔產品中屏幕*大
—分辨率帶寬1Hz - 10MHz
—高選擇性的數字和FFT濾波器
—準峰值檢波器和EMI帶寬
—接口:GPIB、Centronics、RS232C
—自動測量TOI、OBW、相位躁聲和ACP(R)
—可在時域快速測量:*小掃描時間1μS
—可作TDMA信號測量的門控掃描
The Measuring Receiver R&S FSMR is a one-box solution for calibrating RF-level and analog modulation parameters of signal generators as well as attenuation.
Functionscombined in one instrument:
*High precision level calibrator
*Modulation Analyzer for AM/FM/PM
*Audio Analyzer with THD and SINAD
*Support for NRP power sensors for absolute powermeasurements
High-performance spectrum analyzerFunctions andproperties tailored to the needs of calibration labs:
*Very high level stability overtime
*Easy-to-use, with complete operation controlfrom the FSMR front panel
*Traceable calibration
*Documented calibration procedure
*Specifications equal to or exceeding the HP 8902with option 050
FSP樹立了中端產品測量速度和**度的標準,它采用了高度集成的前端和全數字信號處理的后端,并與R&S的先進ASIC相結合,是具有**指標和高可靠性的產品.
FSP3:9KHz - 3GHz
FSP7:9KHz - 7GHz
FSP13:9KHz - 13.6GHz
FSP30:9KHz - 30GHz
FSP40:9KHz - 40GHz
—同檔產品中屏幕*大
—分辨率帶寬1Hz - 10MHz
—高選擇性的數字和FFT濾波器
—準峰值檢波器和EMI帶寬
—接口:GPIB、Centronics、RS232C
—自動測量TOI、OBW、相位躁聲和ACP(R)
—可在時域快速測量:*小掃描時間1μS
—可作TDMA信號測量的門控掃描
The Measuring Receiver R&S FSMR is a one-box solution for calibrating RF-level and analog modulation parameters of signal generators as well as attenuation.
Functionscombined in one instrument:
*High precision level calibrator
*Modulation Analyzer for AM/FM/PM
*Audio Analyzer with THD and SINAD
*Support for NRP power sensors for absolute powermeasurements
High-performance spectrum analyzerFunctions andproperties tailored to the needs of calibration labs:
*Very high level stability overtime
*Easy-to-use, with complete operation controlfrom the FSMR front panel
*Traceable calibration
*Documented calibration procedure
*Specifications equal to or exceeding the HP 8902with option 050